AN APPROACH FOR DETERMINING THE PERIODICITY OF REGULATION WORK OF RISK TECHNICAL SYSTEMS

Authors

  • Nikolay Petrov

DOI:

https://doi.org/10.47839/ijc.2.3.233

Keywords:

Regulation works periodicity, risk technical systems, technical service

Abstract

The estimation of the regulation work periodicity of the risk technical systems is an extremely important moment for its technical service. Many scientific publications concern this problem but most of them deal with a service process for an infinite technical exploitation period. In the present paper a solution of the problem for a limited interval of technical exploitation is suggested. A reliability model of the observed process is developed as the intensity of the failure flux is chosen for a reliability criteria.

References

. BDS27.002-86. Reliability in technics. Main therms and determinations. Committee for quality. Sofia, 1987. (in Bulgarian)

. N.Petrov. Optimization and control for technical exploitation on military aviation systems. VA “Rakovski”, Sofia, 2002. (in Bulgarian)

. A.Rybalov, V.Gladilin. Method for finding of main characteristics of process of failures recovery in complex aviation systems. VVIA “Zhukovski”, Moscow, 1968. (in Russian)

. Ya.Khehagurova. Reliability of automated control systems. “Vysshaya shkola”, Moscow, 1979. (in Russian)

. G.Panayotova. Simple waves for certain hyperbolic systems of PDEs”, “International Journal of Differential Equations and Applications”. Volume 6, No.3 2002.

. N.Tencheva, I.Kalchev. Evaluation of reliability of DMS with built-in structural reservation. SP. “Technicheska mysl”, Vol. 1-2, 2001, pp. 3-10. (in Bulgarian)

Downloads

Published

2014-08-01

How to Cite

Petrov, N. (2014). AN APPROACH FOR DETERMINING THE PERIODICITY OF REGULATION WORK OF RISK TECHNICAL SYSTEMS. International Journal of Computing, 2(3), 74-76. https://doi.org/10.47839/ijc.2.3.233

Issue

Section

Articles