DISTRIBUTED REAL-TIME MEASUREMENT SYSTEMUSING TIME-TRIGGERED NETWORK APPROACH

Authors

  • Piotr Bilski
  • Wiesław Winiecki

DOI:

https://doi.org/10.47839/ijc.7.2.506

Keywords:

Virtual instrumentation, Real-Time systems, integrated programming environments

Abstract

The paper presents results of the examination of the deterministic network used by the distributed virtual instrument. Software technology applied to control measurement data transfer between the real-time components was presented. Configuration of the laboratory test stand, designed to examine deterministic network is described. Results of the research are presented and conclusions, as well as future prospects iterated.

References

M. Auboiroux. MVI Technologies, LabVIEW Real-Time manages an endurance test bench for renault engine components, Available: www.ni.com/realtime

P. Bilski, W. Winiecki. A Low-Cost Real-Time Virtual Spectrum Analyzer, IEEE IMTC’05 Conf. (Ottawa, Canada May, 17-19, 2005), pp. 2216-2221.

P. Bilski, W. Winiecki, Virtual Real-Time Instrumentation Using ETS Configuration, IMEKO XVIII World Congress, (Rio de Janeiro, Brazil, Sept. 17-22, 2006)

W. Nawrocki, M. Wawrzyniak, LAN-Based Measurement Systems, IMEKO 2005 Conf. (Gdynia/Jurata, Poland, September 12-15, 2005), pp. 261-265.

Using Time-Triggered Networks to Communicate Deterministically Over Ethernet with the LabVIEW 8 Real-Time Module, Available: zone.ni.com

Sharing Data using Time-Triggered Shared Variables, Available: zone.ni.com

Using the LabVIEW Shared Variable, Available: zone.ni.com

LabVIEW Measurements Manual, National Instruments Company, 2001.

Ethereal User’s Guide, Available: http://www.ethereal.com

Downloads

Published

2014-08-01

How to Cite

Bilski, P., & Winiecki, W. (2014). DISTRIBUTED REAL-TIME MEASUREMENT SYSTEMUSING TIME-TRIGGERED NETWORK APPROACH. International Journal of Computing, 7(2), 22-29. https://doi.org/10.47839/ijc.7.2.506

Issue

Section

Articles