Development of an Intelligent Control System for Hybrid Stepper Motor as a Tool for Increasing the Efficiency of the Drive
DOI:
https://doi.org/10.47839/ijc.24.1.3882Keywords:
intelligent system, executive means, structure, stepper motor, analytical model, experimental methods, non-contact measurements, laser beams, Simulink model, correctionAbstract
An example of the organization of intelligent systems is presented as a further generalization of multi-level network projects implementing modes, measurement, calibration, monitoring, and correction of the control signal. The structure of executive means of intelligent control based on a vector-indicator and recurrent sequences in the form of a transformed expansion into a Taylor series is proposed. It is demonstrated that the exponential representation of the Euler sine with the recurrent expansion and the Laplace transform reduce the nonlinear model to an analytical one for the hybrid stepper motor. Angular movement of the rotor, currents in the phase windings and the transfer function are presented in the image of voltage drops. Five samples of existing hybrid stepper motor models were obtained and statistically investigated in the Matlab Simulink environment. Two experimental research methods of non-contact rotation angle measurement by a mirror-reflected laser beam and a laser rigidly connecting with a rotating shaft are presented. Research of the experimental models for full-step and half-step settings of the motor driver demonstrates the need for intelligent correction of the model for an adequate response of the executive means of the intelligent systems.
References
. O. Pomorova, O. Savenko, S. Lysenko, A. Kryshchuk, “Multi-agent based approach for botnet detection in a corporate area network using fuzzy logic,” Communications in Computer and Information Science, vol. 370, pp. 243-254, 2013. https://doi.org/10.1007/978-3-642-38865-1_16.
. A. Sachenko, V. Kochan, R. Kochan, V. Turchenko, K. Tsahouridis, and T. Laopoulos, "Error compensation in an intelligent sensing instrumentation system," Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference. Rediscovering Measurement in the Age of Informatics (IMTC 2001), Budapest, Hungary, 2001, pp. 869-874 vol. 2. https://doi.org/10.1109/IMTC.2001.928201.
. V.O. Filatov, A.L. Yerokhin, O.V. Zolotukhin, and M.S. Kudryavtseva, "Information space model in tasks of distributed mobile objects managing," Information Extraction and Processing, vol. 47, no. 123, pp. 80-86, 2019. https://doi.org/10.15407/vidbir2019.47.080.
. A. Sachenko, V. Kochan and V. Turchenko, "Intelligent distributed sensor network," Proceedings of the IEEE Instrumentation and Measurement Technology Conference IMTC/98, St. Paul, MN, USA, 1998, pp. 60-66 vol.1. https://doi.org/10.1109/IMTC.1998.679663.
. A. Trunov, “Criteria for the evaluation of model’s error for a hybrid architecture DSS in the underwater technology ACS,” Eastern-European Journal Enterprise Technologies, № 6/9 (84), pp. 55–62, 2016. https://doi.org/10.15587/1729-4061.2016.85585.
. A. Trunov, A. Malcheniuk, “Recurrent network as a tool for calibration in automated systems and interactive simulators,” Eastern-European Journal of Enterprise Technologies, 2018, 2(9-92), С. 54–60. https://doi.org/10.15587/1729-4061.2018.126498.
. M. Dyvak, A. Pukas and O. Kozak, "Tolerance estimation of parameters set of models created on experimental data," Proceedings of the 2008 International Conference on "Modern Problems of Radio Engineering, Telecommunications and Computer Science" (TCSET), Lviv, Ukraine, 2008, pp. 24-26.
. M. Dyvak, P. Stakhiv, A. Pukas, “Algorithms of parallel calculations in task of tolerance ellipsoidal estimation of interval model parameters,” Bulletin of the Polish Academy of Sciences: Technical Sciences, no. 1, pp. 159-164, 2012. https://doi.org/10.2478/v10175-012-0022-9.
. A. Trunov, “Transformation of operations with fuzzy sets for solving the problems on optimal motion of crewless unmanned vehicles,” Eastern-European Journal of Enterprise Technologies, 4(4-94), pp. 43–50, 2018. https://doi.org/10.15587/1729-4061.2018.140641.
. A. Trunov, “Theoretical predicting the probability of electron detachment for radical of cell photo acceptor,” Proceedings of the 2017 IEEE 37th International Conference on Electronics and Nanotechnology, ELNANO’2017, 2017, рр. 353–357. https://doi.org/10.1109/ELNANO.2017.7939776.
. M. Hojati and A. Baktash, "Design and fabrication of a new hybrid stepper motor with significant improvements in torque density," in Engineering Science and Technology, an International Journal, vol. 24, issue 5, pp. 1116-1122, 2021. https://doi.org/10.1016/j.jestch.2021.01.016.
. N. A. Iqteit, K. Yahya, "Simple mathematical and Simulink model of stepper motor," Energies, vol. 15, issue 17, 6159, 2022. https://doi.org/10.3390/en15176159.
. C.-K. Lai, B.-W. Lin, H.-Y. Lai, G.-Y. Chen, "FPGA-based hybrid stepper motor drive system design by variable structure control," Actuators, vol. 10, issue 6, 113, 2021. https://doi.org/10.3390/act10060113.
. D. Deaconu., A. Chirila, V. Navrapescu, M. Albu, C. Ghita, C. Popescu, "Two hybrid stepper motor models," Proceedings of the 9th WSEAS International Conference on Automation and Information (ICAI08), June 2008, pp 129-134.
. Virgala, M. Keleman, M. Varga, P. Kurylo, "Analyzing, modeling and simulation of humanoid robot hand motion, " in Modelling of Mechanical and Mechatronic Systems (MMaMS), an Procedia Engineering, vol. 96, pp. 489-499, 2014. https://doi.org/10.1016/j.proeng.2014.12.121.
. M. Varga, F. Filakovský, I. Virgila, "Simulation and analyzes of inverse-kinematic model of humanoid robot hand," Technical Sciences and Technologies, vol. 17, no. 3, pp. 117-122, 2019. https://doi.org/10.25140/2411-5363-2019-3(17)-117-122.
. L. Saharan, L. Wu, and Y. Tadesse, "Modeling and simulation of robotic finger powered by nylon artificial muscles," Journal of Mechanisms and Robotics, vol. 12, issue 1, 014501, pp. 1-11, 2020. https://doi.org/10.1115/1.4044740.
. N. Uchiyama, Y. Osugi, Y. Kajita, S. Sano, S. Takagi, "Model reference control for collision avoidance of a human-operated robotic manipulator," International Review of Automatic Control, vol. 3, no. 2, pp. 219-225, 2011.
. B. Ouamri, Z. Ahmed-Foitih, "Computed torque control of a Puma 600 robot by using fuzzy logic," International Review of Automatic Control, vol. 4, no. 2, pp. 248-252, 2011.
. A.M. Zaid, M. A. Yaqub, "UTHM Hand: Mechanics behind the dexterous anthropomorphic hand", World Academy Of Science, Engineering And Technology, vol.74, pp. 154-158, 2011.
. W. Kim, D. Shin and C. C. Chung, "Microstepping using a disturbance observer and a variable structure controller for permanent-magnet stepper motors," IEEE Transactions on Industrial Electronics, vol. 60, no. 7, pp. 2689-2699, 2013. https://doi.org/10.1109/TIE.2012.2198033.
. C. Rusu, I. Birou, and E. Szoke, "Model based design controller for the stepper motor," Proceedings of the 2008 IEEE International Conference on Automation, Quality and Testing, Robotics, 2008, pp. 175-179. https://doi.org/10.1109/AQTR.2008.4588816.
. B. Aranjo, P. K. Soori, and P. Talukder, "Stepper motor drives for robotic applications," Proceedings of the 2012 IEEE International Power Engineering and Optimization Conference, Melaka, Malaysia, 2012. https://doi.org/10.1109/PEOCO.2012.6230890.
. M. Venkatesan, "IOTs based stepper motor control using Arduino," Research Journal of Science and Engineering Systems, 2018. [Online]. Available at: http://www.rjsces.com/journal_admin/resource/uploads/attachment/attachment_02052018092255_Rn1Irkbi2f.pdf.
. C. Hemalatha, et al., "Brushless DC motor controlled by using internet of things," IJSTE-International Journal of Science Technology & Engineering, vol. 3, issue 9, pp. 373-377, 2017.
. A. Menaka, R. Seetharaman, and K. Anandan, "Wireless stepper motor control using RF-communication," Proceedings of the 2022 2nd IEEE International Conference on Innovative Practices in Technology and Management (ICIPTM), vol. 2, 2022. https://doi.org/10.1109/ICIPTM54933.2022.9754178.
. N. R. Lakshmi, N. R. Konduru, "Wireless control of stepper motor using radio frequency communication," American Journal of Science, Engineering and Technology, vol. 2, issue 4, pp. 106-111, 2017.
. H. Fukumoto, et al., "Developing a remote laboratory system of stepper motor for learning support," IEEE Transactions on Education, vol. 64, issue 3, pp. 292-298, 2020. https://doi.org/10.1109/TE.2020.3042595.
. H. Le-Huy, P. Brunelle, and G. Sybille, "Design and implementation of a versatile stepper motor model for simulink’s SimPowerSystems," Proceedings of the 2008 IEEE International Symposium on Industrial Electronics, 2008. https://doi.org/10.1109/ISIE.2008.4677271.
. I. Jaffri, et al., "BlueSteps: A bluetooth based stepper motor control system," Journal of Embedded Systems, vol. 3, issue 1, pp. 21-27, 2015.
. T. Bhuvaneswari, O. R. Yee, and C. Venugopal, "Design of Zigbee based wireless stepper motor controller using FPGA," Proceedings of the 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2020. https://doi.org/10.1109/PEDES49360.2020.9379509.
. B. Murdyantoro, D. S. E. Atmaja, and H. Rachmat, "Application design of farmbot based on Internet of Things (IoT)," International Journal on Advanced Science, Engineering and Information Technology, vol. 9, issue 4, pp. 1163-1170, 2019. https://doi.org/10.18517/ijaseit.9.4.9483.
. A. A. Badrul Hisham, Z. H. Low, M. H. I. Ishak, & N. H. Idris, “Robotic arm control using Internet of Things (IoT),” ELEKTRIKA- Journal of Electrical Engineering, vol. 18, issue 3-2, pp. 51–55, 2019. https://doi.org/10.11113/elektrika.v18n3-2.201
. Q. Wu, S. Yu, P. Chen & L. Zhang, “Design and implementation of intelligent mechanical arm,” Proceedings of the 11th International Conference on Computer Engineering and Networks, 2021, pp. 1090-1096, https://doi.org/10.1007/978-981-16-6554-7_120
. A. Shetty, et al., “Wi-fi-controlled robotic arm using Arduino,” in: Vasudevan, H., Gajic, Z., Deshmukh, A. (eds) Proceedings of International Conference on Wireless Communication . Lecture Notes on Data Engineering and Communications Technologies, vol 36. Springer, Singapore. 2020. pp 325–333. https://doi.org/10.1007/978-981-15-1002-1_34
. S. Niu, Y. Mao, “Electric vehicle systems: state of the art and emerging technologies,” In: Lee, C.H.T. (eds) Emerging Technologies for Electric and Hybrid Vehicles. Green Energy and Technology. Springer, Singapore. 2024. pp. 1-25. https://doi.org/10.1007/978-981-99-3060-9_1
. Y. Tian, K. Zhang, Y. Zhang, F. Bi, J. Yang, “Development and implementation of small industrial robot arm based on Arduino,” In: Jain, V., Patnaik, S., Popențiu Vlădicescu, F., Sethi, I. (eds) Recent Trends in Intelligent Computing, Communication and Devices. Advances in Intelligent Systems and Computing, vol 1006. Springer, Singapore. 2020. pp 943–948. https://doi.org/10.1007/978-981-13-9406-5_113
. K. Lemmel-Vélez, C.A. Valencia-Hernandez, “Design of a robotic hand controlled by electromyography signals using an Arduino type microcontroller for people with disabilities,” In: Figueroa-García, J., López-Santana, E., Villa-Ramírez, J., Ferro-Escobar, R. (eds) Applied Computer Sciences in Engineering. WEA 2017. Communications in Computer and Information Science, vol 742. Springer, Cham. 2017. pp 289–299. https://doi.org/10.1007/978-3-319-66963-2_26
. B. Zhang, L. Liu, W. Zhao, “Research on the intelligent unmanned vehicle measurement system,” In: Jain, V., Patnaik, S., Popențiu Vlădicescu, F., Sethi, I. (eds) Recent Trends in Intelligent Computing, Communication and Devices. Advances in Intelligent Systems and Computing, vol 1006. Springer, Singapore. 2020. pp 357-362. https://doi.org/10.1007/978-981-13-9406-5_43
. Y. Wang, “Thoughts on the development trend of intelligent transportation and the development of intelligent vehicles,” In: Jain, V., Patnaik, S., Popențiu Vlădicescu, F., Sethi, I. (eds) Recent Trends in Intelligent Computing, Communication and Devices. Advances in Intelligent Systems and Computing, vol 1006. Springer, Singapore. 2020. pp. 523-529. https://doi.org/10.1007/978-981-13-9406-5_63
Downloads
Published
How to Cite
Issue
Section
License
International Journal of Computing is an open access journal. Authors who publish with this journal agree to the following terms:• Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
• Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
• Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
