A SIMULATION MODEL FOR ROBOT’S SLIP DISPLACEMENT SENSORS
DOI:
https://doi.org/10.47839/ijc.15.4.854Keywords:
slip displacement sensor, adaptive robot, registration element, electrical resistance, capacitance, simulation, Proteus, slippage direction’ VHDL-model, timing diagrams.Abstract
This paper deals with a simulation model of slip displacement sensors for the object slip signals’ registration in the adaptive robot’s gripper. The study presents the analysis of different methods for slip displacement signals detection, as well as authors’ solutions. Special attention is paid to the investigations of the developed sensor with the resistive registration element in rod type structure of sensitive elements, which is able to operate in harsh and corrosive environments. A sensing system for the object slip signals’ registration in the adaptive robot’s gripper with a clamping force correction is developed for proposed slip displacement sensor with multi-component resistive registration elements. The hardware implementation of the sensing system for slip signals’ registration and obtained results are considered in details. The simulation model of the proposed slip displacement sensor based on polytypic conductive rubber is modeled by Proteus software. The intelligent approaches with the use of a field programmable gate array (FPGA) and VHDL-model to the sensing system designing allow to define the slippage direction in slip displacement sensor based on resistive registration elements. Thus, this expands the functionality of the developed sensor.References
Y.G. Kozyirev, Industrial Robots, Handbook, 2nd ed., revised and enlarged, Moscow: Publisher Mashinostroenie, 1988, 392 p. (in Russian).
S. Osadchy, V. Zozulya, A. Timoshenko, “The dynamic characteristics of the manipulator with parallel kinematic structure based on experimental data,” in Proceedings of the 2013 IEEE 7th International Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS), Vol. 2, Berlin, Germany, September 12-14, pp. 905-911.
Y. Kondratenko, A. Topalov, O. Gerasin, “Analysis and modeling of the slip signals’ registration processes based on sensors with multicomponent sensing elements,” in Proc. of the 13th Int. conf. CADSM 2015, Lviv, Ukraine, February 24-27, 2015, pp. 109-112. DOI: 10.1109/CADSM.2015.7230810.
A. N. Tkachenko, N. M. Brovinskaya, Y.P. Kondratenko, “Evolutionary adaptation of control processes in robots operating in non-stationary environments,” Mechanism and Machine Theory, Vol. 18, No. 4, Printed in Great Britain, pp. 275-278, 1983. DOI: 10.1016/0094-114X(83)90118-0
D. Souto, A. Faiña, F. López Peña, R. J. Duro, “Lappa: a new type of robot for underwater non-magnetic and complex hull cleaning,” IEEE Int. Conf. on Robotics and Automation (ICRA), Karlsruhe, May 6-10, 2013, pp. 3394-3399.
Y.P. Kondratenko, O.V. Kozlov, O.S. Gerasin, Y.M. Zaporozhets, “Synthesis and research of neuro-fuzzy observer of clamping force for mobile robot automatic control system,” in Proc. of the 2016 IEEE First Int. Conf. on Data Stream Mining & Processing (DSMP), Lviv, Ukraine, August 23-27, 2016. – pp. 90-95. DOI: 10.1109/DSMP.2016.7583514.
D. Souto, A. Faiña, A. Deibe, F. López-Peña, R.J. Duro, “A robot for the unsupervised grit-blasting of ship hulls,” Int. J. of Advanced Robotic Systems, Vol. 9, 82, pp. 1-16, 2012.
Y. Kondratenko, E. Shvets, O. Shyshkin, “Modern sensor systems of intelligent robots based on the slip displacement signal detection,” in Ann. of DAAAM for 2007 & Proc. of the 18th Int. DAAAM Symp. Intelligent Manufacturing and Automation, Vienna, Austria, 2007, pp. 381-382.
D. Roy, Grip Force and Slip Analysis in Robotic Grasp: New Stochastic Paradigm Through Sensor Data Fusion, in: J.G. Rocha, S. Lanceros-Mendez (Eds.), Sensors, Focus on Tactile, Force and Stress Sensors, Vienna, 2008, pp. 217-252.
Y. Kondratenko, L. Klymenko, V. Kondratenko, G. Kondratenko, E. Shvets, “Slip displacement sensors for intelligent robots: solutions and models,” in Proc. of the 2013 IEEE 7th Int. Conf. on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS), Vol. 2, Berlin, Germany, September 12-14, 2013, pp. 861-866. DOI: 10.1109/IDAACS.2013.6663050
A. Palagin, V. Opanasenko, “Reconfigurable computing technology,” J. Cybernetics and Systems Analysis, Springer, Vol. 43, No. 5, New York, pp. 675–686, 2007.
A. Drozd, V. Kharchenko, S. Antoshchuk, J. Sulima, M. Drozd, “Checkability of the digital components in safety-critical systems: problems and solutions,” in Proc. IEEE East-West Design and Test Symposium, EWDTS'2011, 2011, pp. 411-416.
Y.P. Kondratenko and V.Y. Kondratenko, Advanced trends in design of slip displacement sensors for intelligent robots, in: Y. Kondratenko, R. Duro (Eds.), Advances in Intelligent Robotics and Collaborative Automation, River Publishers Series in Automation, Control and Robotics, 2015, pp. 167-192.
A.M. Zaki, O.A. Mahgoub, A.M. El-Shafei, A.M. Soliman, “Design and implementation of efficient intelligent robotic gripper,” WSEAS Transactions on Systems, November, Vol. 9, Issue 11, pp. 1130-1142, 2010.
S. Chakraborty, S. Kumari, “Design and development of a magneto-optic sensor for magnetic field measurements,” Sensors & Transducers, Vol. 184, Issue 1, pp. 153-158, January 2015.
P. Gan, G. Hu, Z. Li, Z. Chen, X. Cheng, H. Huang, X. Zhang, “The algorithm on displacement differences calculation and the error of surface displacement measuring device,” Sensors & Transducers, Vol. 162, Issue 1, pp. 167-172, January 2014.
T. D’Alessio, R. Steindler, “Slip sensors for the control of the grasp in functional neuromuscular stimulation,” Med. Eng. Phys., Vol. 17, No. 6, pp. 466-470, 1995.
V.N. Dubey, R.M. Crowder, “A dynamic tactile sensor on photoelastic effect,” Sensors and Actuators, A 128, pp. 217-224, 2006.
G. Cannata, M. Maggiali, Design of a tactile sensor for robot hands, in: J.G. Rocha, S. Lanceros-Mendez (Eds.), Sensors, Focus on Tactile, Force and Stress Sensors, Vienna, 2008, pp. 271-288.
F. Xu, Yu. Ge, Y. Yu, J. Ding, T. Ju, S. Li, “The design of a novel flexible tactile sensor based on pressure-conductive rubber,” Sensors & Transducers, Vol. 124, Issue 1, pp. 19-29, January 2011.
R. D. Ponce Wonga, J.D. Posner, V.J. Santos, “Flexible microfluidic normal force sensor skin for tactile feedback,” Sensors and Actuators, A 179, pp. 62-69, 2012.
P.S. Girão, P.M.P. Ramos, O. Postolache, J.M.D. Pereira, “Tactile sensors for robotic applications,” Measurement, Vol. 46, pp. 1257-1271, 2013.
Y.P. Kondratenko, O.S. Gerasin, A.M. Topalov, “Modern sensing systems of intelligent robots based on multi-component slip displacement sensors,” in Proc. of the 2015 IEEE 8th Int. Conf. on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Vol. 2, Warsaw, Poland, September 24-26, 2015, pp. 902-907. DOI: 10.1109/IDAACS.2015.7341434
D. Gunji, Y. Mizoguchi, S. Teshigawara, A. Ming, A. Namiki, M. Ishikawa, M. Shimojo, “Grasping force control of multi-fingered robot hand based on slip detection using tactile sensor,” SICE Annu. Conf. the University Electro-Communications, Japan 2008, August, 2008, pp. 894-899.
A. Drimus, G. Kootstra, A. Bilberg, D. Kragic, “Design of a flexible tactile sensor for classification of rigid and deformable objects,” Robotics and Autonomous Systems, No. 62, pp. 3-15, 2014.
B. G. Baranochnikov, A. A. Blinov, V.S. Zhuravlev, V.A. Kelmi, “The impact of tensile deformation on the properties of conductive rubber,” Caoutchouc and Rubber, No. 10, pp. 34-36, 1979. (in Russian).
Y. M. Lahtin, V.P. Leonteva, Materials Science, third ed., revised and enlarged, Moscow: Publisher Mashinostroenie, 1990, 528 p. (in Russian).
Y. M. Zaporozhets, Y. P. Kondratenko, O.S. Shyshkin, “Mathematical model of slip displacement sensor with registration of transversal constituents of magnetic field of sensing element,” Technical electrodynamics, No. 4, pp. 67-72, 2012. (in Ukrainian).
M. Dorozhovets, O. Іvahіv, V. Mokritsky, Unifying Converters with Information of Mechatronic Systems, Manual, Lviv: Publisher National University "Lviv Polіtehnіka", 2009, 304 p. (in Ukrainian).
Q. Sheng, G. Yu Xu, G. Liu, “Design of PZT micro-displacement acquisition system,” Sensors & Transducers, Vol. 182, Issue 11, pp. 119-124, November 2014.
A. Cranny, D.P.J. Cotton, P.H. Chappell, S.P. Beeby, N.M. White, “Thick-film force and slip sensors for a prosthetic hand,” Sensors and Actuators, Vol. 123-124, pp. 162-171, 2005.
V.L. Shilo, Functional analog integrated circuit chips, Radio i svyaz, Moscow, 1982, 128 p. (in Russian).
P. J. Zeno, “Emulating the functionality of rodents’ neurobiological navigation and spatial cognition cells in a mobile robot,” International Journal of Computing, Vol. 14, Issue 2, pp. 77-86, 2015.
J. Sieck, V. Yatskiv, A. Sachenko, T. Tsavolyk, “Two-dimensional error control based on modular correcting codes,” International Journal of Computing, Vol. 14, Issue 4, pp. 208-215, 2015.
V. Hahanov, K. L. Man, B. A. A. Abbas, E. Litvinova, S. Chumachenko, E. G. Lim, M. Leach, “An extended HDL SoC TAB-model for diagnosability and repair,” in Proc. of the International MultiConference of Engineers and Computer Scientists 2015, Hong Kong, March 18-20, Vol II, 2015, pp. 729-732.
W.M. El-Medany, “GPRS-based remote sensing and climate control system using CMOD CPLD,” International Journal of Computing, Vol. 8, Issue 2, pp. 68-73, 2009.
P. Wilson, Design Recipes for FPGAs: Using Verilog and VHDL, second ed., Elsevier, Newnes, 2016, 392 p.
V. V. Semenets, I. V. Hahanova, V.I. Hahanov, Design of Digital Systems by Using VHDL Language, KHNURE, Kharkov, 2003, 492 p. (in Russian).
Downloads
Published
How to Cite
Issue
Section
License
International Journal of Computing is an open access journal. Authors who publish with this journal agree to the following terms:• Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
• Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
• Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
